Having the holes in frame at 4 inches apart and the two sets of saddles and spotter bar holes at

2 inches apart, allows for an height adjustment intervals of 2 inches.  This along with the

use of alloy steel side inserting pins eliminates  'cheesing' of the frame with many

large holes, adding strength.

Paint shown is for pictorial contrast.  Standard paint is metal flake black.  Cobalt blue metal flake, silver metal flake, most standard single colors available at no charge.

• HEAVY 2.5 X 2.5 X 3/16 AND 3 X 3 X 3/16 FRAMES, ALL WELDED SIDE FRAMES, SIMPLE, EASY TO ASSEMBLE SLIDE IN AND BOLT  CROSS MEMBERS (SHIPS FLAT), STIFFER THAN BOLTED FLANGES.  CROSS MEMBER DESIGN ALSO ALLOWS RACK TO CONFORM TO UNEVEN FLOORS ON ASSEMBLY, ELIMINATING WOBBLE.

• 1000 POUND RATING (2 1/2 X 2 1/2 FRAME), 1500 POUND RATING ( 3 X 3 FRAME)

• 7 ½ FEET HIGH, 48.5 (PRK-1), 49 (PRK-2) INCHES WIDE (53 INCHES AT SPLAYED FEET), 32 INCHES ROOM FORE/AFT INSIDE CAGE,  60 INCHES LONG AT BASE

• BARBELL SADDLES (J-HOOKS) CONTAIN ROLLERS FOR EASY SIDE TO SIDE BARBELL POSITIONING.  SADDLES ARE REVERSIBLE, PLACE BARBELL AT EITHER END OF RACK, INSIDE OR OUTSIDE.  SPLAYED FEET ALLOWS WIDE STANCE SQUATTERS TO SQUAT OUTSIDE THE RACK WITHOUT EXCESSIVE STEP BACK (WILL NEED SPOTTERS).

• BARBELL SADDLE ROLLERS ARE 1 1/8" dia. 4320 steel ALLOY (annealed to be softer than the barbell, but more wear resistant than cold rolled steel).  rollers SPIN on bronze bushings.

• 2 INCH HEIGHT ADJUSTMENT INCREMENTS ON BARBELL SADDLES AND SPOTTER BARS, LOWEST SPOTTER BAR SETTING 12 INCHES (REMOVE PINS TO PLACE ON FLOOR), HIGHEST BARBELL SADDLE SETTING AT 67 INCHES

• 2 X 2 X 3/16 (PRK-1), 2 1/2 X 2 1/2 (PRK-2) STEEL TUBE ADJUSTABLE HEIGHT SPOTTER BARS STRONGER THAN  1.5 INCH DIAMETER ALLOY STEEL SOLID RODS, WON'T BEND LIKE 1 INCH BARS, SPOTTER BARS HAVE ALUMINUM PROTECTORS, WON'T WEAR LIKE PLASTIC, WON'T CHEW UP KNURLING ON YOUR EXPENSIVE BARBELLS

• 3 x 3 RACK VERY HEAVY AT OVER 500 POUNDS, WILL NOT LIFT WHEN DOING BAND WORK.  ALL POWER RACKS INCLUDE BOLT DOWN TABS AT ALL CORNERS ON BASE

• ALL POWER RACKS CAN BE ORDERED WITH OPTIONAL WEIGHT TREES (WT-1-PRK) WEIGHT TREES BOLT ON, ARE SELF STANDING,  CAN BE USED ALONE WHEN NOT ON RACK.  SEE 'WEIGHT LIFTING ACCESSORIES' UNDER PRODUCTS FOR MORE DESCRIPTION

• 3 X 3 RACKS EQUAL IN STRENGTH AND STABILITY AS SAMSON 3 X 3 RACKS COSTING MUCH MORE.

• WEIGHT RATINGS ARE VERY CONSERVATIVE, SEE 'DESIGN PHILOSOPHY' ON HOME PAGE FOR EXPLANATION.

Pricing

* With plastic sleeves on branches.  This price only if ordered with a power rack.  Bolt tabs will be also be added to power rack to secure trees

Standard height is 7 1/2 feet, will fit in areas with 8 foot ceilings.  7 foot and 8 foot high racks no extra charge, state in quote.

Band attachment hooks, plate holders extra, if desired, state in quote request.  Customer will need to provide instructions on location and type of hooks and plate holders.

Chin up bar- add $100

1.33 inch height adjustment intervals, (three sets of holes in saddles and spotter bars)- add $50

ECONOMY POWER RACK
LIKE ABOVE BUT WITH 2 ½ X 2 ½ X 1/8 TUBE FRAME, 2 X 2 X 1/8 TUBE SAFETY BARS WITHOUT ALUMINUM PROTECTORS, FRONT BASE SUPPORTS NOT SPLAYED, BUT STRAIGHT BACK, STANDARD J-HOOKS WITHOUT ROLLERS. J-HOOK HEIGHT ADJUSTMENT INTERVAL IS 2 INCHES. 750 LB WEIGHT RATING.  STILL A VERY STRONG, STABLE RACK, EQUAL TO THE COMPETITION'S HARD CORE POWER RACKS COSTING MUCH MORE, MUCH STURDIER THAN TYPICAL FRANCHISE GYM UNITS.

PRK-1E: $800.00

Price does not include sales tax when applicable, does not include shipping

Pricing subject to change at any time, quoted prices will be honored for 30 days after quotation is sent back to you.