Combo Rack (COMBO-1) on competition platform (in metal flake black)

 Colors shown are for pictorial contrast.  Standard color is metal flake black.  Most standard single colors, and cobalt blue and silver metal flakes, available for no extra cost.  Pads are black.                        

• HEAVY DUTY IN/OUT SQUAT RACK

• 2.5 X 2.5 X 3/16 STEEL TUBING WITH 3 X 3 X 3/16 STEEL TUBE BASE, BASE BACK BAR REMOVABLE FOR EASY TRANSPORT, 1200 POUND RATING.  VERY STURDY AND STABLE. 

• ADJUSTABLE HEIGHT FROM 40 INCHES TO 66 INCHES HIGH IN 2 INCH INCREMENTS, ALLOY STEEL STEPPED PINS.  WIDTH OF SADDLES EASILY ADJUSTABLE BY TILTING UPRIGHTS AND SECURING WITH PINS.  NO SLIDING OF RACKS ON FLOOR TO SET 'IN'.  BARBELL SADDLES CONTAIN ROLLERS TO ALLOW EASY UPRIGHT ANGLE POSITIONING AND POSITIONING OF BARBELL  INITIAL 'OUT' WIDTH ALSO ADJUSTABLE.  GREAT FOR 8 FOOT SQUAT BARS LIKE THE TEXAS SQUAT BAR.  THE COMPETITION DOES NOT HAVE ADJUSTABLE INITIAL WIDTH.

• THREE UPRIGHT ANGLE POSITIONS.  ONE UP (OUT) POSITION, TWO ANGLED (IN) POSITIONS.  RACKS CAN BE SET IN PROPER 'IN' POSITION REGARDLESS OF LIFTER'S HEIGHT.  ALLOY STEEL SPRING PINS FOR EASY ANGLE ADJUSTMENT.
  The Polak Made squat rack can be set to two 'in' positions.  Thus all lifters, regardless of height, can have the uprights set in such the barbell saddles are near the 32 in markings on a competition barbell.  This allows plenty of room for hands without having the saddles dangerously close to each other.   Safety stops prevent uprights from collapsing in if control is lost during angle adjustment.  Upright angle adjustment is now by steel spring pins for easy in/out setting.  Pins are custom made, stronger than the commercial carbon steel spring pins used by the competition.

• BARBELL SADDLE ROLLERS ARE 1 1/8" dia. 4320 steel ALLOY (annealed to be softer than the barbell, but more wear resistant than cold rolled steel).  rollers SPIN on bronze bushings.

• INCLUDES STURDY JACK HANDLES FOR RAISING AND LOWERING RACKS.   JACK HANDLES RIDE ON ROLLER BEARINGS AND HAVE STORAGE HOLDERS.

• BOLT TABS FOR SECURE MOUNTING TO FLOOR OR PLATFORM.

'COMBO' COMPETITION RACK

• VERSATILE IN/OUT SQUAT RACK WITH REMOVABLE BENCH PRESS ATTACHMENT.  BENCH HAS REMOVABLE SPOTTER PLATFORM AND SECURELY ATTACHES TO SQUAT RACK BASE.   BENCH CAN BE USED AS A WORKOUT BENCH WHEN NOT ATTACHED.  BENCH PAD SAME HEIGHT, MATERIALS, AND DIMENSIONS AS FOR POLAK MADE COMPETITION BENCH PRESSES.  SEPARATE SADDLES FOR BENCH PRESS, HAVE ROLLERS AND ARE SUPPORTED BY 1/2 THICK STEEL BARS.  HEIGHT RANGE ON BENCH SADDLES 25 TO 43 INCHES OFF FLOOR.  BENCH FRAME 2 1/2 X 2 1/2 X 3/16 STEEL TUBE.  1200 LB WEIGHT RATING.   
• BENCH STANDARD WITH THE COMPETITION 'GRIPPY' PAD COVERING.  SPECIAL EXPENSIVE VINYL, VERY TOUGH, SUEDE LIKE SURFACE.
• STANDARD BENCH PAD HEIGHT IS 17.25 INCHES (44cm) OFF FLOOR (ABOUT MIDDLE OF IPF 16.5 TO 17.75 INCH SPECIFICATION RANGE).  OTHER HEIGHTS CAN BE ORDERED (HEIGHTS IN IPF RANGE ARE NO EXTRA CHARGE), SPECIFY IN QUOTE REQUEST.
• SPOTTER STANDS AVAILABLE TO SATISFIES REQUIREMENTS FOR POWERLIFTING FEDERATIONS THAT REQUIRE THEM.  COST IS $250.  HEAVY 2  X 2 X 3/16 TUBE ADJUSTABLE HEIGHT (1 INCH INTERVALS) STANDS WITH 2 1/2 X 2 1/2 X 3/16 TUBE RECEIVERS.  MUCH STRONGER (AND CHEAPER) THAN THE COMPETITION.

BOTH THE POLAK MADE IN/OUT SQUAT RACK AND THE COMBO RACK ARE GROUND UP DESIGNS CHOCKED FULL OF INNOVATIVE FEATURES.  HEAVY, VERY STRONG AND STABLE.  NOT AN ER EQUIPMENT COMBO RACK CLONE LIKE THE COMPETITION.

Pricing

Powder coat paint available, call for quote

Price does not include sales tax when applicable, does not include shipping

Pricing subject to change at any time, quoted prices will be honored for 30 days after quotation is sent back to you.